Optimisation of cement-sand mortar compositions modified with fine-grained rubber powder in relation to their mechanical performance

Jerzy Kukiełka; Wojciech Bańkowski; Marcin Gajewski; Mirosław Graczyk

doi:10.7409/rabdim.025.021

Published: 2025-09-30

Vol. 24 No. 3 (2025)

Optimisation of cement-sand mortar compositions modified with fine-grained rubber powder in relation to their mechanical performance

Jerzy Kukiełka

, Wojciech Bańkowski

, Marcin Gajewski

, Mirosław Graczyk

Section: Articles

https://doi.org/10.7409/rabdim.025.021

Abstract

The article presents the results of a research study aimed at determining the optimum amount of 0/1 mm rubber powder additive for cement-sand mortars (CSM) used in asphalt-cement concretes (ACC), to meet the requirements for mineral-cement-emulsion mixtures (MCEM) due to the lack of regulations concerning these concretes. The study includes test results for indirect tensile strength (ITS) and stiffness modulus (IT-CY method) at 5°C, performed after 7 and 28 days of curing. The regression curves for ITS and IT-CY values in relation to rubber powder content after 7 days were well described by exponential functions, whereas the results after 28 days were best fitted by linear functions. It has been observed that compliance with ITS limit requirements excludes CSR mortars that meet IT-CY requirements, and vice versa. In order to clearly define the requirements for mortar mixtures, minimum and maximum ITS and IT-CY values were proposed so that the samples would meet both requirements simultaneously. Supplementary tests were also carried out to assess water resistance.

Keywords:

cement-sand mortars, recycling, rubber powder

Most read articles by the same author(s)

Beata Gajewska, Marcin Gajewski, Cezary Kraszewski, Leszek Rafalski, Investigations of resilient moduli of selected hydraulically bound mixtures (HBM) under cyclic load , Roads and Bridges – Drogi i Mosty: Vol. 11 No. 4 (2012)
Mirosław Graczyk, Marcin Gajewski, Radosław Szczerba, Structural analysis of airfield concrete pavement with doweled joints taking into account curling of slabs , Roads and Bridges – Drogi i Mosty: Vol. 15 No. 2 (2016)
Wojciech Bańkowski, Analysis of fatigue life of asphalt concretes considering different types of mixtures and binders , Roads and Bridges – Drogi i Mosty: Vol. 17 No. 4 (2018)
Nicola Baldo, Fabio Rondinella, Fabiola Daneluz, Pavla Vacková, Jan Valentin, Marcin Gajewski, Jan Król, Mechanical performance prediction of asphalt mixtures: a baseline study of linear and non-linear regression compared with neural network modeling , Roads and Bridges – Drogi i Mosty: Vol. 24 No. 1 (2025)
Wojciech Bańkowski, Renata Horodecka, Marcin Gajewski, Krzysztof Mirski, The extended assessment of warm mix asphalts durability , Roads and Bridges – Drogi i Mosty: Vol. 15 No. 2 (2016)
Karolina Pełczyńska, Marcin Gajewski, Review of selected fatigue criteria for hydraulic bound layers in road pavements , Roads and Bridges – Drogi i Mosty: Vol. 17 No. 3 (2018)
Marcin Gajewski, Renata Horodecka, Rheological properties of road bitumens modified by natural asphalt , Roads and Bridges – Drogi i Mosty: Vol. 17 No. 2 (2018)
Mirosław Graczyk, Józef Rafa, Leszek Rafalski, Adam Zofka, New analytical solution of flow and heat refraction problem in multilayer pavement , Roads and Bridges – Drogi i Mosty: Vol. 13 No. 1 (2014)
Marcin Gajewski, Comparison of rheological properties of chosen elastomers used in production of bridge bearings , Roads and Bridges – Drogi i Mosty: Vol. 16 No. 1 (2017)
Beata Gajewska, Marcin Gajewski, Cezary Kraszewski, Analysis of a flexible road pavement on a subgrade with an inclusion in the form of a pipeline running along the road axis , Roads and Bridges – Drogi i Mosty: Vol. 17 No. 4 (2018)

1 2 3 > >>

Download files

PDF

Citation rules

Kukiełka, J., Bańkowski, W., Gajewski, M., & Graczyk, M. (2025). Optimisation of cement-sand mortar compositions modified with fine-grained rubber powder in relation to their mechanical performance. Roads and Bridges – Drogi I Mosty, 24(3), 353–364. https://doi.org/10.7409/rabdim.025.021

Cited by / Share

Licence

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

Dołżycki B.: Instrukcja projektowania i wbudowania mieszanek mineralno-cementowo- emulsyjnych (MCE). Projekt realizowany w ramach Wspólnego Przedsięwzięcia RID, finansowany ze środków Narodowego Centrum Badań i Rozwoju oraz Generalnej Dyrekcji Dróg Krajowych i Autostrad. Politechnika Gdańska, 2019
Google Scholar

The cement sustainability Initiative. A joint commitment to sustainable development. World Business Council for Sustainable Development, 2002
Google Scholar

Veena S., Stashwick S.: Cut carbon and toxic pollution, make cement clean and green. National Geophysical Data Center (NRDC), 2022, https://www.nrdc.org/bio/veena- singla/cut-carbon-and-toxic-pollution-make-cement-clean-and-green (available: 25.08.2025)
Google Scholar

Mahasenan N., Smith S., Humphreys K.: The cement industry and global climate change: current and potential future cement industry CO2 emissions. Proceedings of the 6th International Conference on Greenhouse Gas Control Technologies (GHGT-6), Kyoto, Japan, 2002, Volume II, 2003, 995-1000, DOI: 10.1016/B978-008044276-1/50157-4
Google Scholar

Guidelines for National Greenhouse Gas Inventories. Volume 3: Industrial Processes and Product Use. Intergovernmental Panel on Climate Change (IPCC), 2006, https://www.ipcc-nggip.iges.or.jp/public/2006gl/vol3.html (available: 25.08.2025)
Google Scholar

O’Farrell K.: Tyre flows and recycling analysis - project report. Envisage works, Project reference no.: A21508, Australian Department of the Environment and Energy, 2019, https://www.dcceew.gov.au/sites/default/files/documents/tyre-flows-recycling-analysis.pdfwww.environment.gov.au (available: 25.08.2025)
Google Scholar

Lapkovskis V., Mironovs V., Kasperovich A., Myadelets V., Goliandin D.: Crumb rubber as a secondary raw material from waste rubber: A short review of end-of-life mechanical processing methods. Recycling, 5, 4, 2020, Article ID: 32, DOI: 10.3390/recycling5040032
Google Scholar

USTMA’s 2023 End-of-Life Tire Management Report, https://www.ustires.org/2023-elt- tire-report-page (available: 25.08.2025)
Google Scholar

Facts and figures about materials, waste and recycling. United States Environmental Protection Agency (USEPA), 2018, https://www.epa.gov/facts-and-figures-about- materials-waste-and-recycling (available: 25.08.2025)
Google Scholar

Europe – 91% of all End of Life Tyres collected and treated in 2018. European Tyre and Rubber Manufacturers’ Association (ETRMA), 2020, https://www.etrma.org/library/europe-91-of-all-end-of-life-tyres-collected-and-treated-in-2018 (available: 25.08.2025)
Google Scholar

Youssf O., Mills J.E., Ellis M., Benn T., Zhuge Y., Ma X., Gravina R.J.: Practical application of crumb rubber concrete in residential slabs. Structures, 36, 2022, 837-853, DOI: 10.1016/j.istruc.2021.12.062
Google Scholar

Youssf O., Mills J.E., Benn T., Zhuge Y., Ma X., Roychand R., Gravina R.: Development of crumb rubber concrete for practical application in the residential construction sector – design and processing. Construction and Building Materials, 260, 2020, Article ID: 119813, DOI: 10.1016/j.conbuildmat.2020.119813
Google Scholar

Ołdakowska E.: Assessment of selected properties of normal concretes with the grinded rubber from worn out vehicle tyres. Ecological Engineering & Environmental Technology, 43, 2015, 49-54, DOI: 10.12912/23920629/58902
Google Scholar

Yinka S.M., Dugguh L.N., Taiye L.E.: Stress-strain characteristic of crumb-rubber masonry concrete prism column under compression. Concrete Beton, 168, 2022, 20-24, https://concretesocietysa.org.za/wp-content/uploads/filr/9680/168d.pdf (available: 25.08.2025)
Google Scholar

Guidelines for the design, manufacture and construction of bitumen-rubber asphalt wearing courses. Sabita Manual 19, 2019, https://www.sabita.co.za/wp- content/uploads/2019/10/sabita-manual-19-at-sep-2019-1.pdf (available: 25.08.2025)
Google Scholar

Kilani A.J., Ikotun B.D., Abdulwahab R.: Effect of crumb rubber on concrete’s and mortar’s structural properties: A review. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 49, 2025, 1037-1067, DOI: 10.1007/s40996-024-01647-8
Google Scholar

Yang H., Zhishuan L., Yaqiang B., Guoqi H., Dongqiao L.: Experimental study on the mechanical properties of crumb rubber concrete after elevated temperature. Polymers, 15, 14, 2023, Article ID: 3102, DOI: 10.3390/polym15143102
Google Scholar

Los Santos-Ortega J., Fraile-García E., Ferreiro-Cabello J.: Methodology for the environmental analysis of mortar doped with crumb rubber from end-of-life tires. Construction and Building Materials, 399, 2023, Article ID: 132519, DOI: 10.1016/j.conbuildmat.2023.132519
Google Scholar

Wesam S., Rubendran W., Mohammed L., Nikbakht E., Liew M., Khed V., Adamu M.: Deformation properties of concrete containing crumb rubber as partial replacement to fine aggregate. International Journal of Civil Engineering and Technology, 9, 10, 2018, 317-326, https://iaeme.com/MasterAdmin/Journal_uploads/IJCIET/VOLUME_9_ISSUE_10/IJCI ET_09_10_032.pdf (available: 25.08.2025)
Google Scholar

Shahrul S., Mohammed B.S., Wahab M.M.A., Liew M.S.: Mechanical properties of crumb rubber mortar containing nano-silica using response surface methodology. Materials, 14, 19, 2021, Article ID: 5496, DOI: 10.3390/ma14195496
Google Scholar

Sukontasukkul P., Wiwatpattanapong S.: Moderate lightweight concrete mixed with recycled crumb rubber. Thammasat International Journal of Science and Technology, 14, 1, 2009, 1-9, https://www.thaiscience.info/journals/Article/TSTJ/10564204.pdf (available: 25.08.2025)
Google Scholar

Siringi G.M.: Properties of concrete with tire derived aggregate and crumb rubber as a ligthweight substitute for mineral aggregates in the concrete mix. PhD Thesis, University of Texas at Arlington, Faculty of the Graduate School, 2012
Google Scholar

Youssf O., ElGawady M.A., Mills J.E., Ma X.: An experimental investigation of crumb rubber concrete confined by fibre reinforced polymer tubes. Construction and Building Materials, 53, 2014, 522-532, DOI: 10.1016/j.conbuildmat.2013.12.007
Google Scholar

Ataria R.B., Wang Y.C.: Mechanical properties and durability performance of recycled aggregate concrete containing crumb rubber. Materials, 15, 5, 2022, Article ID: 1776, DOI: 10.3390/ma15051776
Google Scholar

Malik M., Singh E.S.: Properties of concrete with crumb rubber replacing fine aggregates (sand). International Journal of Engineering Research and Applications, 11, 7, 2021, 1-12, https://www.ijera.com/papers/vol11no7/Ser-4/A1107040112.pdf (available: 25.08.2025)
Google Scholar

Khed V.C., Mohammed B.S., Nuruddin M.F.: Effects of different crumb rubber sizes on the flowability and compressive strength of hybrid fibre reinforced ECC. 4th International Conference on Civil and Environmental Engineering for Sustainability (IConCEES 2017), Langkawi, Malaysia, 2017, IOP Conference Series: Earth and Environmental Science, 140, 2018, Article ID: 012137, DOI: 10.1088/1755-1315/140/1/012137
Google Scholar

Mohammadi I., Khabbaz H., Vessalas K.: In-depth assessment of Crumb Rubber Concrete (CRC) prepared by water-soaking treatment method for rigid pavements. Construction and Building Materials, 71, 2014, 456-471, 456-471, DOI: 10.1016/j.conbuildmat.2014.08.085
Google Scholar

Javaid A., Ram E.S., Sharma P.: Strength characteristics using crumb rubber and steel fiber in rigid pavement. International Research Journal of Engineering and Technology (IRJET), 7, 8, 2020, 4858-4871, https://www.irjet.net/archives/V7/i8/IRJET-V7I8835.pdf (available: 25.08.2025)
Google Scholar

Diwakar A., Singh V.P., Kumar A.: Effect of crumb rubber on the mechanical properties of concrete and future possibility in building structure. Global Scientific Journal, 7, 11, 2019, 1056-1072, https://www.globalscientificjournal.com/researchpaper/Effect_Of_Crumb_Rubber_On_ The_Mechanical_Properties_Of_Concrete_And_Future_Possibility_In_Building_Struct ure.pdf (available: 25.08.2025)
Google Scholar

Tayal A., Kataria V., Garg R., Arora K., Sharma A., Singh R.: To study the impact of crumb rubber on Young’s modulus of concrete. International Research Journal of Engineering and Technology (IRJET), 6, 5, 2019, 1778-1785, https://www.irjet.net/archives/V6/i5/IRJET-V6I5353.pdf (available: 25.08.2025)
Google Scholar

Gerges N.N., Issa C.A., Fawaz S.A.: Rubber concrete: mechanical and dynamical properties. Case Studies in Construction Materials, 9, 3, 2018, Article ID: e00184, DOI: 10.1016/j.cscm.2018.e00184
Google Scholar

Han Y., Lv Z., Bai Y., Han G., Li D.: Experimental study on the mechanical properties of crumb rubber concrete after elevated temperature. Polymers, 15, 14, 2023, Article ID: 3102, DOI: 10.3390/polym15143102
Google Scholar

Hilal N.N.: Hardened properties of self-compacting concrete with different crumb rubber size and content. International Journal of Sustainable Built Environment, 6, 1, 2017, 191-206, DOI: 10.1016/j.ijsbe.2017.03.001
Google Scholar

Turatsinze A., Bonnet S., Granju J.L.: Mechanical characterisation of cement-based mortar incorporating rubber aggregates from recycled worn tyres. Building and Environment, 40, 2, 2005, 221-226, DOI: 10.1016/j.buildenv.2004.05.012
Google Scholar

Angelin A.F., Lintz R.C.C., Gachet-Barbosa L.A., Osório W.R.: The effects of porosity on mechanical behavior and water absorption of an environmentally friendly cement mortar with recycled rubber. Construction and Building Materials, 151, 2017, 534-545, DOI: 10.1016/j.conbuildmat.2017.06.061
Google Scholar

Khaloo A.R., Dehestani M., Rahmatabadi P.: Mechanical properties of concrete containing a high volume of tire-rubber particles. Waste Management, 28, 12, 2008, 2472-2482, DOI: 10.1016/j.wasman.2008.01.015
Google Scholar

Kukiełka J.: Mechanical properties of cement and cement-asphalt matrices with rubber powder. Budownictwo i Architek- tura, 16, 3, 2017, 53-63, DOI: 10.24358/Bud-Arch_17_163_06
Google Scholar

Kukiełka J., Sadowski T.: The experimental assessment of the deformability of cement and cement-asphalt matrices with rubber powder additive by application of DIC system. 7th International Conference on Advanced Materials and Structures – AMS 2018, IOP Conference Series: Materials Science and Engineering, 416, 2018, Article ID: 012049, DOI: 10.1088/1757-899X/416/1/012049
Google Scholar

Chaturvedy G.K., Pandey U.K., Kumar H.: Effect of graphene oxide on the microscopic, physical and mechanical characteristics of rubberized concrete. Innovative Infrastructure Solutions, 8, 6, 2023, Article ID: 163, DOI: 10.1007/s41062-023-01133-6
Google Scholar

Zhu Z., Zhou M., Wang B., Xu X.: Enhancing permeability and mechanical properties of rubber cement-based materials through surface modification of waste tire rubber powder. Construction and Building Materials, 425, 2024, Article ID: 136098, DOI: 10.1016/j.conbuildmat.2024.136098
Google Scholar

Chou L.H., Yang C.K., Lee M.T., Shu C.C.: Effects of partial oxidation of crumb rubber on properties of rubberized mortar. Composites Part B: Engineering, 41, 8, 2010, 613-616, DOI: 10.1016/j.compositesb.2010.09.009
Google Scholar

Chen C.Y., Lee M.T.: Application of crumb rubber in cement-matrix composite. Materials, 12, 3, 2019, Article ID: 529, DOI: 10.3390/ma12030529
Google Scholar

Liu R., Zhang L.: Utilization of waste tire rubber powder in concrete. Composite Interfaces, 22, 9, 2015, 823-835, DOI: 10.1080/09276440.2015.1065619
Google Scholar

Davoodi A., Esfahani M.A., Bayat M., Mohammadyan-Yasouj S.E.: Evaluation of performance parameters of cement mortar in semi-flexible pavement using rubber powder and nano silica additives. Construction and Building Materials, 302, 2021, Article ID: 124166, DOI: 10.1016/j.conbuildmat.2021.124166
Google Scholar

Optimisation of cement-sand mortar compositions modified with fine-grained rubber powder in relation to their mechanical performance

Abstract

Keywords:

Most read articles by the same author(s)

Downloads

Jerzy Kukiełka

Wojciech Bańkowski

Marcin Gajewski

Mirosław Graczyk