Roads and Bridges - Drogi i Mosty
22, 3, 2023, 287-307

Evaluation of the effect of processed plastic additives on the properties of paving grade bitumen

Marcin Gajewski Mail
http://orcid.org/0000-0002-3171-8504
Road and Bridge Research Institute, 1 Instytutowa St., 03-302 Warsaw
Renata Horodecka Mail
https://orcid.org/0000-0002-5933-5177
Road and Bridge Research Institute, 1 Instytutowa St., 03-302 Warsaw
Wojciech Bańkowski Mail
https://orcid.org/0000-0002-2602-4014
Road and Bridge Research Institute, 1 Instytutowa St., 03-302 Warsaw
Aleksandra Grzegórska Mail
Green Park VI Limited Liability Company, 59 Słowackiego St., 87-700 Aleksandrów Kujawski
Maciej Kłopociński Mail
Green Park VI Limited Liability Company, 59 Słowackiego St., 87-700 Aleksandrów Kujawski
Published: 2023-09-30

Abstract

Modified bituminous binders are widely used in road construction. Various types of modification are known; SBS polymer modification is considered the most advantageous and popular. The article presents the results of research focused on the possibility of modification of paving grade binders in a different manner, i.e. by using processed recycled plastics. The basic requirement in the case of this type of modification is that storage stability of the obtained material is ensured and that performance properties of the material do not deteriorate in comparison to those of the base binder. The work presents chosen test results of materials obtained by blending conventional paving grade bitumen 50/70 and 70/100 with additives produced from PP, PS, LDPE, HDPE (and their combinations). The additives were obtained in the process of pyrolysis, using different production parameters – processing temperature and time. Basic tests were performed on 56 different bitumen-additive blends in order to identify the most promising variants for further wider analysis. A method for objective selection of the best bitumen-additive blends was proposed. The proposed method is not a classic ranking method (attribution of points); it is based on an objective function composed of three component functions, which correspond to individual blend parameters and are assigned adequate weights. The method may be adjusted by selection of weights or use of different component functions. Based on the adopted method, additives with the most advantageous properties in terms of use in asphalt mixture production were identified.

Keywords


HDPE, LDPE, paving grade bitumen, performance properties, plastics, PP, PS, recycling.

Full Text:

PDF PDF

References


Bańkowski W., Sybilski D., Król J., Kowalski K., Radziszewski P., Skorek P.: Wykorzystanie destruktu asfaltowego – konieczność i innowacja. Budownictwo i Architektura, 15, 1, 2016, 157-167, DOI: 10.24358/Bud-Arch_16_151_17

Dołżycki B., Jaskuła P.: Review and evaluation of cold recycling with bitumen emulsion and cement for rehabilitation of old pavements, Journal of Traffic and Transportation Engineering, 6, 4, 2019, 311-323, DOI: 10.1016/j.jtte.2019.02.002

Skotnicki Ł., Kuźniewsk J., Szydło A.: Research on the properties of mineral–cement emulsion mixtures using recycled road pavement materials. Materials, 14, 3, 2021, ID article: 563, DOI: 10.3390/ma14030563

Buczyński P., Iwański M., Krasowski J.: Assessment of the impact of hydraulic binder on the properties of the cold recycled mixture with foamed bitumen and bitumen emulsion: Field tests. Buildings, 10, 12, 2020, ID article: 223, DOI: 10.3390/buildings10120223

Jaskuła P., Stienss M., Szydłowski C.: Wpływ zbrojenia polimerowymi włóknami rozproszonymi na wybrane właściwości mieszanek mineralno-asfaltowych. Drogownictwo, 72, 9, 2017, 275-280

Radziszewski P., Sarnowski M., Plewa A., Pokorski P.: Properties of Asphalt Concrete with Basalt-Polymer Fibers. Archives of Civil Engineering, 64, 4, 2018, 197–209, DOI: 10.2478/ace-2018-0052

Kukiełka J., Bańkowski W., Mirski K.: Asphalt-cement concretes with reclaimed asphalt pavement and rubber powder from recycled tire. Materials, 14, 9, 2021, ID article: 2412, DOI: 10.3390/ma14092412

Buczyński P., Iwański M., Mazurek G., Krasowski J., Krasowski M.: Effects of portland cement and polymer powder on the properties of cement-bound road base mixtures. Materials, 13, 19, 2020, ID article: 4253, DOI: 10.3390/MA13194253

Skotnicki Ł.: Application of rubber dust in modified asphalts for SMA mixtures. Przegląd Komunikacyjny, 76, 3, 2021, 15-20, DOI: 10.35117/A_ENG_21_03_02

Król J. B., Radziszewski P., Kowalski K. J., Sarnowski M., Czajkowski P.: Laboratory and Field Investigations of Polymer and Crumb Rubber Modified Bitumen. Journal of Civil Engineering and Architecture, 8, 10, 2014, 1327-1334

Thives L.P., Pais J.C., Pereira P.A.A., Palha C.A.O.F., Trichês G.: Contribution of Asphalt Rubber Mixtures to Sustainable Pavements by Reducing Pavement Thickness. Materials, 15, 23, 2022, ID article: 8592, DOI: 10.3390/ma15238592

Jia X., Huang B., Bowers B.F., Zhao S.: Infrared spectra and rheological properties of asphalt cement containing waste engine oil residues. Construction and Building Materials, 50, 2014, 683-691, DOI: 10.1016/j.conbuildmat.2013.10.012

Huang G,. Yang T, He Z., Yu L., Xiao H.: Polyurethane as a modifier for road asphalt: A literature review. Construction and Building Materials, 356, 2022, ID article: 129058, DOI: 10.1016/j.conbuildmat.2022.129058

Filonzi A., Komaragiri S., Lakshmi Roja K., Sreeram A., Bhasin A., Masad E.: A comprehensive evaluation of mixture and binder properties to explore the use of low-density polyethylene (LDPE) as an asphalt modifier and co-modifier. International Journal of Pavement Engineering, 2022, DOI: 10.1080/10298436.2022.2120988

da Silva A.J.R., de Figueiredo Lopes Lucena A.E, de Medeiros Melo Neto O., Mendonça A.M.G.D., Costa D.B., de Lima R.K.B.: Effects of using waste high-density polyethylene on the rheological, mechanical, and thermal performance of asphalt materials. Environment, Development and Sustainability, 2023, DOI: 10.1007/s10668-023-03306-w

Kakar M.R., Mikhailenko P., Piao Z., Poulikakos L.D.: High and low temperature performance of polyethylene waste plastic modified low noise asphalt mixtures. Construction and Building Materials, 348, 2022, ID article: 128633, DOI: 10.1016/j.conbuildmat.2022.128633

Mehta D., Saboo N., Mariam S., Utkarsh A.: A review on the use of waste plastics in hot mix asphalt. Mechanics of Time-Dependent Materials, 2023, DOI: 10.1007/s11043-023-09622-y

Veropalumbo R., Russo F., Oreto C., Buonocore G.G., Verdolotti L., Muiambo H., Biancardo S.A., Viscione N.: Chemical, thermal, and rheological performance of asphalt binder containing plastic waste. Sustainability, 13, 24, 2021, ID article: 13887, DOI: 10.3390/su132413887

Noor A., Rehman M.A.U.: A mini-review on the use of plastic waste as a modifier of the bituminous mix for flexible pavement. Cleaner Materials 4, 4, 2022, ID article: 100059, DOI: 10.1016/j.clema.2022.100059

Yildirim Y.: Polymer modified asphalt binders. Construction and Building Materials, 21, 1, 2007, 66-72, DOI: 10.1016/j.conbuildmat.2005.07.007

Bańkowski W.: Analysis of fatigue life of asphalt concretes considering different types of mixtures and binders. Roads and Bridges – Drogi i Mosty, 17, 4, 2018, 253-270, DOI: 10.7409/rabdim.018.016

Gajewski M., Bańkowski W., Pronk A.C.: Evaluation of fatigue life of high modulus asphalt concrete with use of three different definitions, International Journal of Pavement Engineering, 21, 14, 2020, 1717-1728, DOI: 10.1080/10298436.2018.1564302

Gajewski M., Langlois P.A.: Prediction of Asphalt Concrete Low-temperature Cracking Resistance on the Basis of Different Constitutive Models. Procedia Engineering, 91, 2014, 81-86, DOI: 10.1016/j.proeng.2014.12.016

Bańkowski W., Horodecka R., Gajewski M., Mirski K.: The extended assessment of warm mix asphalts durability. Roads and Bridges – Drogi i Mosty, 15, 2, 2016, 157-173, DOI: 10.7409/rabdim.016.010

White G., Hall F.: Comparing asphalt modified with recycled plastic polymers to conventional polymer modified asphalt. in: Hoff I., Mork H., Saba R. (eds.): Eleventh International Conference on the Bearing Capacity of Roads, Railways and Airfields, 1, 2021, 3-17, DOI: 10.1201/9781003222880-1

Radeef H.R., Abdul Hassan N., Abidin A.R.Z., Mahmud M.Z.H., Yusoffa N.I.M., Idham Mohd Satar M.K., Warid M.N.M.: Enhanced Dry Process Method for Modified Asphalt Containing Plastic Waste. Frontiers in Materials, 8, 2021, DOI: 10.3389/fmats.2021.700231

Pasetto M., Baliello A., Pasquini E., Poulikakos L.: Dry Addition of Recycled Waste Polyethylene in Asphalt Mixtures: A Laboratory Study. Materials, 15, 14, 2022, ID article: 4739, DOI: 10.3390/ma15144739

Lu D.X., Enfrin M., Boom Y.J., Giustozzi F.: Future recyclability of hot mix asphalt containing recycled plastics. Construction and Building Materials, 368, 1, 2023, ID artiocle: 130396, DOI: 10.1016/j.conbuildmat.2023.130396

Singh A., Gupta A., Miljković M.: Intermediate- and high-temperature damage of bitumen modified by HDPE from various sources. Road Materials and Pavement Design, 24, 2023, 640-653, DOI: 10.1080/14680629.2023.2181017

Kakar M.R., Mikhailenko P., Piao Z., Bueno M., Poulikakos L.: Analysis of waste polyethylene (PE) and its by-products in asphalt binder. Construction and Building Materials, 280, 2021, ID article: 122492, DOI: 10.1016/j.conbuildmat.2021.122492

Ren S., Liu X., Jing R., Gao Y., Lin P., Erkens S.: Investigating the rheological properties and compatibility behaviours of RET/PE and WR/CR/SBS compound-modified bitumen. Road Materials and Pavement Design, 2023, DOI: 10.1080/14680629.2023.2221347

Al-Abdul Wahhab H.I., Dalhat M.A., Habib M.A.: Storage stability and high-temperature performance of asphalt binder modified with recycled plastic. Road Materials and Pavement Design, 18, 5, 2017, 1117-1134, DOI: 10.1080/14680629.2016.1207554


Evaluation of the effect of processed plastic additives on the properties of paving grade bitumen

  
Gajewski, Marcin et al. Evaluation of the effect of processed plastic additives on the properties of paving grade bitumen. Roads and Bridges - Drogi i Mosty, [S.l.], v. 22, n. 3, p. 287-307, sep. 2023. ISSN 2449-769X. Available at: <>. Date accessed: 29 May. 2024. doi:http://dx.doi.org/10.7409/rabdim.023.015.