Roads and Bridges - Drogi i Mosty
17, 3, 2018, 227-248

Review of selected fatigue criteria for hydraulic bound layers in road pavements

Karolina Pełczyńska Mail
TPA Ltd., 8 Parzniewska St., 05-800 Pruszków
Marcin Gajewski Mail
Road and Bridge Research Institute, 1 Instytutowa St., 03-302 Warszawa
Published: 2018-09-30


The paper contains a review of hydraulically bound layers fatigue resistance criteria that are commonly applied in designing the road pavement structures. The effect of the mechanical parameters applied in the respective criteria on the obtained fatigue resistances is analysed with their different nature underscored. Most of the fatigue criteria define the fatigue life through parameters which are related to it only indirectly (such as the tensile strength, the ultimate tensile strain, etc.) instead of using the results of fatigue tests. The results obtained with different criteria are compared and correlated with the results obtained with the methodology used in preparation of “The Catalogue of Typical Flexible and Semi-rigid Pavements”, a Polish pavement design guide published in 2014. It is demonstrated that the differences between predictions generated with the different empirical fatigue models are noticeably greater in the case of lower traffic classes (service levels), converging for higher traffic classes.


fatigue criteria, fatigue durability/life, hydraulic bound mix, semi-rigid pavements.

Full Text:



Katalog Typowych Konstrukcji Nawierzchni Podatnych i Półsztywnych. Załącznik do Zarządzenia nr 31 Generalnego Dyrektora Dróg Krajowych i Autostrad z dnia 16.06.2014 r., opracowany w Katedrze Drogowej Politechniki Gdańskiej

Dempsey B.J., et. al.: Development of a preliminary ALRS stabilized materials pavement, (SPAS). University of Illinois, Department of Civil Engineering, Urbana, Report ESL - TR - 83 -34, Engineering and Service Laboratory, Air Force Engineering and Service Center, Tyndall Air Force Base, Florida, 1984

Judycki J., et al: Analizy i projektowanie konstrukcji nawierzchni podatnych i półsztywnych. Wydawnictwa Komunikacji i Łączności, Warszawa, 2014

Judycki J.: Comparison of fatigue criteria for flexible and semi-rigid pavements. Eighth International Conference on Asphalt Pavements, Vol. II, 1997, Seattle, Washington, 919-937

Guide for Mechanistic-Empirical Design of New and Rehabilitated Pavement Structures, Final Report, NCHRP 1-37A, 2004

Sybilski D., et al: Mechanistic-Empirical Pavement Design Guide Podręcznik Mechanistyczno - Empirycznego Projektowania Nawierzchni Drogowych w warunkach polskich. GDDKiA, IBDiM, Warszawa, 2013

Zhou F., Fernando E.G., Scullion T.: Development, calibration, and validation of performance prediction models for the Texas M-E flexible pavement design system. Report No. FHWA/TX-10/0-5798-2, Texas Transportation Institute, The Texas A&M University System College Station, Texas, 2010

Scullion T., Uzan J., Hilbrich S., Chen P.: Thickness design systems for pavements containing soil-cement bases. Portland Cement Assosiation, Skokie, Illinois, 2008

Wen H., Muhunthan B., Wang J., Li X., Edil T., Tinjum J.M.: Characterization of cementitiously stabilized layers for use in pavement design and analysis. National Academy of Sciences, NCHRP Report 789, Project No. 4-36, Washington, DC, 2014

Thoegersen F., Busch C., Henrichsen A.: Mechanistic design of semi-rigid pavements - an incremental approach. Road Directorate, Report No. 138, Danish Road Institute, Hedehusene, Denmark, 2004

Flintsch G.W., Diefenderfer B.K., Nunez O.: Composite pavement systems: Synthesis of design and construction practices. Virginia Transportation Research Council, Report No. FHWA/VTRC 09-CR2, Charlottesville, VA, 2008

Hĺndbog: MMOPP Dimensioneringsprogram for Vejbefćstelser Brugervejledning, Anlćg og Planlćgning, Vejregler. Danish Road Directorate, 2013, 20.07.2018

Making Best Use of Long-Life Pavements in Europe. ELLPAG PHASE 2: A Guide to the Use of Long-Life Semi-Rigid Pavements, FEHRL Report 2009/01

Nunn M.: Development of a more versatile approach to flexible and flexible composite pavement design. Prepared for Highway Agency, TRL Report TRL615, 2004

Design Manual for Roads and Bridges, Volume 7: Pavement Design and Maintenance, Section 2: Pavement Design and Construction, Part 3, HD 26/06, Pavement Design, 2006

Molenaar A.A.A., Pu B.: Prediction of fatigue cracking in cement treated base courses. Proceedings of 6th RILEM International Conference on Cracking in Pavements, Pavement Cracking Mechanisms, Modeling, Detection, Testing and Case Histories, Chicago, 2008, 191-199

Pu B.: Analysis of the Performance of Pavements with a Cement Treated Base. MSc Thesis Report, Delft University of Technology, Delft, 2007

Molenaar A.A.A.: Lecture notes CT4860 Structural Pavement Design, Design of Flexible Pavements. Delft University of Technology, Delft, Netherlands, 2007

De Beer M.: Behaviour of cementitious sub-base layers in bitumen base road structures. Dissertation (M.Eng.), University of Pretoria, Faculty of Engineering, Pretoria, 1985

De Beer M.: Aspects of the design and behaviour of road structures incorporating lightly cementitious layer. PhD thesis. University of Pretoria, Department of Civil Engineering, Pretoria, 1990

Theyse H.L., De Beer M., Rust F.C.: Overview of South African mechanistic pavement design method. Transportation Research Record: Journal of the Transportation Research Board, Volume 1539, 1996

Theyse H.L., Muthen M.: Pavement analysis and design software (PADS) based on the South African mechanistic-empirical design method. South African Transport Conference “Action in Transport for the New Millennium”, Conference Papers, Transportek CSIR, South Africa, 2000,;sequence=1 20.07.2018

Theyse H.L., Maina J.W., Kannemeyer L.: Revision of the South African flexible pavement design method: mechanistic-empirical component. Proceedings of the 9th Conference on Asphalt Pavements for Southern Africa (CAPSA’07), Gaborone, Bostwana, 2007, 256-292

South African Pavement Engineering Manual, Chapter 10: Pavement Design. Second Edition, South African National Roads Agency SOC Ltd., South Africa, 2014

Conception et Dimensionmement des Structures de Chaussee. Guide technique. Service d’Etudes Techniques des Routes et Autoroutes (SETRA), LCPC, 1994

French design manual for pavement structures. Guide technique. LCPC, 1997

Kraszewski C.: Charakterystyka wytrzymałościowa mieszanek kruszyw związanych hydraulicznie do stosowania w podbudowach drogowych. Roads and Bridges - Drogi i Mosty, 8, 3, 2009, 31-54.

NF EN 14227 - parties 1, 2, 3 et 5 melanges traits aux liants hydrauliques – specifications. Cftr - info. Comité Français pour les Techniques Routičres, 13, 2006

Technical Guide. Treatment of soil with lime and/or hydraulic binders. Application to the construction of pavement base layers. SETRA, French Road Engineering Committee (CFTR), 2007

Balay J.M., Brosseaud Y., Bara B., Castaneda E.: Adaptation of the French pavement design to countries in South America. In Congrčs 8eme Jornadas International des Asfalto, France, 2012

Jaczewski M., Judycki J.: Zastosowanie francuskiej metody projektowania nawierzchni asfaltowych o podbudowach związanych spoiwami hydraulicznymi w warunkach polskich. Drogownictwo, LXVII, 6, 2012, 199-203

Jaczewski M., Judycki J.: Adaptacja francuskich kryteriów zmęczeniowych do projektowania nawierzchni podatnych w warunkach polskich. Drogownictwo, LXVII, 5, 2012, 164-170

Jameson G.: Guide to pavement technology Part 2: Pavement Structural Design. Austroads, Publication No. AGPT02-17, 2012

Jameson G., Bryant P.: Framework for the Revision of Austroads Design Procedures for Pavement Containing Cemented Materials, Austroads, Publication No. AP-R463-14, 2014

Alderson A., Jameson G., Papacostas A.: Cemented Materials Characterisation: Final Report. Austroads, Publication No. AP-R462-14, 2014

Roads and Maritime Supplement to Austroads Guide to Pavement Technology Part 2: Pavement Structural Design. Document No: RMS 11.050, NSW Government, 2015

Parmeggiani G.: Three dimensional structural design of asphalt pavements. AAPA Pavements Industry Conference, Sydney, Australia, 2007, 1-10

Review of selected fatigue criteria for hydraulic bound layers in road pavements

Pełczyńska, Karolina; Gajewski, Marcin. Review of selected fatigue criteria for hydraulic bound layers in road pavements. Roads and Bridges - Drogi i Mosty, [S.l.], v. 17, n. 3, p. 227-248, sep. 2018. ISSN 2449-769X. Available at: <>. Date accessed: 27 May. 2024. doi: