Roads and Bridges - Drogi i Mosty
22, 2, 2023, 181-199

Health monitoring of the Veresk Bridge by comparing the results of precision instrument measurements and modelling with Abaqus software and wavelet function

Mahtisa Kivani Mail
https://orcid.org/0009-0009-8996-9910
Islamic Azad University, Department of Civil Engineering, Shahroud Branch, Shahroud, Iran
Ali Keyhani Mail
https://orcid.org/0000-0002-5544-0631
Shahrood University of Technology, Faculty of Civil Engineering, Shahrood, P.O. Box: 3619995161, Iran
Published: 2023-06-30

Abstract

Identification and classification of structural failures is a vital aspect of bridge maintenance. When local structural damage is identified without delay, its repair is less expensive and problematic than in the case of general damage. To determine seismic vulnerability or post-seismic damage, structural health assessments are frequently performed on bridges, dams, and buildings. The aim of this study is to keep track of the overall health of the Veresk Railway Bridge, which has been in service for over 90 years. For this purpose, the structure was modeled in the ABAQUS finite element software. Mode shapes of the structure were then extracted, the positions were determined as maximum points using MATLAB software, and a wavelet function was applied to these shapes. The results showed that the wavelet function is highly accurate and its results are close to the real values measured for the bridge.


Keywords


ABAQUS, precision instruments, Veresk Bridge, wavelet function.

Full Text:

PDF

References


Fabozzi S., Licata V., Autuori S., Bilotta E.: Prediction of the seismic behavior of an underground railway station and a tunnel in Napoli. Underground Space, 2, 2, 2017, 45-61, DOI: 10.1016/j.undsp.2017.03.005

Omenzetter P., Brownjohn J.M.W.: Application of time series analysis for bridge monitoring. Smart Materials and Structures, 15, 1, 2006, 129-138, DOI: 10.1088/0964-1726/15/1/041

Glisic B., Inaudi D.: Fibre Optic Methods for Structural Health Monitoring. John Wiley & Sons, Chichester, 2007

Manouchehrian A., Cai M.: Simulation of unstable rock failure under unloading conditions. Canadian Geotechnical Journal, 53, 1, 2016, 22-34, DOI: 10.1139/cgj-2015-0126

Seyedpoor S.M., Yazdanpanah O.: An efficient indicator for structural damage localization using the change of strain energy based on static noisy data. Applied Mathematical Modelling, 38, 9-10, 2014, 2661-2672, DOI: 10.1016/j.apm.2013.10.072

Yang H., Xu F., Ma J., Huang K.: Strain modal-based damage identification method and its application to crane girder without original model. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233, 4, 2019, 1299-1311, DOI: 10.1177/0954406218769924

Ma J., Kharboutly H., Benali A., Ben Amar F., Bouzit M.: Joint angle estimation with accelerometers for dynamic postural analysis. Journal of Biomechanics, 48, 13, 2015, 3616-3624, DOI: 10.1016/j.jbiomech.2015.08.008

Sanchez J.C.: Evaluation of Structural Damage Identification Methods Based on Dynamic Characteristics. Ph.D. Dissertation, Department of Civil Engineering, University of Puerto Rico, 2005

Park B., Sohn H., Yeum C.M., Truong T.C.: Laser ultrasonic imaging and damage detection for a rotating structure. Structural Health Monitoring, 12, 5-6, 2013, 494-506, DOI: 10.1177/1475921713507100

Kaloop M.R., Elbeltagi E., Hu J.W.: Recent Advances of Structures Monitoring and Evaluation Using GPS-Time Series Monitoring Systems: A Review. International Journal of Geo-Information, 6, 12, 2017, 382, DOI: 10.3390/ijgi6120382

Abou-Galala M., Rabah M., Kaloop M., Zidan Z.M.: Assessment of the accuracy and convergence period of Precise Point Positioning. Mansoura Engineering Journal, 57, 2, 2016, 1-5, DOI: 10.21608/bfemu.2020.98819

Yigit C.O., Gurlek E.: Experimental testing of high-rate GNSS precise point positioning (PPP) method for detecting dynamic vertical displacement response of engineering structures. Geomatics Natural Hazards and Risk, 8, 2, 2017, 893-904, DOI: 10.1080/19475705.2017.1284160

Geng J., Meng X., Dodson A.H., Ge M., Teferle F.N.: Rapid re-convergences to ambiguity-fixed solutions in precise point positioning. Journal of Geodesy, 84, 12, 2010, 705-714, DOI: 10.1007/s00190-010-0404-4

Ge M., Gendt G., Rothacher M.A., Shi C., Liu J.: Resolution of GPS carrier-phase ambiguities in precise point positioning (PPP) with daily observations. Journal of Geodesy, 82, 7, 2008, 389-399, DOI: 10.1007/s00190-007-0187-4

Li W., Kong Q., Ho S.C.M., Mo Y.L., Song G.: Feasibility study of using smart aggregates as embedded acoustic emission sensors for health monitoring of concrete structures. Smart Materials and Structures, 25, 11, 2016, ID article: 115031, DOI: 10.1088/0964-1726/25/11/115031

Dehghani E., Zadeh M.N., Nabizadeh A.: Evaluation of seismic behavior of railway bridges considering track-bridge interaction. Roads and Bridges – Drogi i Mosty, 18, 1, 2019, 51-66, DOI: 10.7409/rabdim.019.004

Xia Q., Cheng Y.Y., Zhang J., Zhu F.Q.: In-service condition assessment of a long-span suspension bridge using temperature-induced strain data. Journal of Bridge Engineering, 22, 3, 2017, ID article: a04016124, DOI: 10.1061/(ASCE)BE.1943-5592.0001003

Ni Y.Q., Xia Y.X.: Strain-based condition assessment of a suspension bridge instrumented with structural health monitoring system. International Journal of Structural Stability and Dynamics, 16, 4, 2016, ID article: 1640027, DOI: 10.1142/S0219455416400277

Khordmand S.A., Selajgeh M.: Determining damage in bending plates by wavelet method and its severity. Master’s thesis, Shahid Bahonar University, Kerman, 2018

Haynes C., Todd M.: Enhanced damage localization for complex structures through statistical modelling and sensor fusion. Mechanical Systems and Signal Processing, 54-55, 2015, 195-209, DOI: 10.1016/j.ymssp.2014.08.015

Xiao C., Qu W.L., Tan D.M.: An application of data fusion technology in structural health monitoring and damage identification. Proceedings of SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 5758, 2005, 451-461, DOI: 10.1117/12.599783

Bao X., Xia Z., Ye G.: Numerical analysis on the seismic behavior of a large metro subway tunnel in liquefiable ground. Tunnelling and Underground Space Technology, 6, 6, 2017, 35-52, DOI: 10.1016/j.tust.2017.04.005

Regulations of the technical and executive system of the Islamic Republic of Iran No. 139 – Standard Loads for Bridges (in Persian), 2000, https://shaghool.ir/Files/139-AeinNameBargozaryPolha.pdf (15.03.2023)

Szafrański M.: Dynamic analysis of the railway bridge span under moving loads. Roads and Bridges – Drogi i Mosty, 17, 4, 2018, 299-316, DOI: 10.7409/rabdim.018.019

Regulations of the technical and executive system of the Islamic Republic of Iran No. 308 – Guideline for Design of Retaining Walls, 2017 (in Persian), https://geoparsian.com/wp-content/uploads/2020/12/Code-308-1.pdf (15.03.2023)


Health monitoring of the Veresk Bridge by comparing the results of precision instrument measurements and modelling with Abaqus software and wavelet function

  
Kivani, Mahtisa; Keyhani, Ali. Health monitoring of the Veresk Bridge by comparing the results of precision instrument measurements and modelling with Abaqus software and wavelet function. Roads and Bridges - Drogi i Mosty, [S.l.], v. 22, n. 2, p. 181-199, jun. 2023. ISSN 2449-769X. Available at: <>. Date accessed: 27 May. 2024. doi:http://dx.doi.org/10.7409/rabdim.023.009.