14, 3, 2015, 203-218
Testing of a large-span soil-shell structure without stiffeners during backfilling process
Abstract
The paper presents the results of field tests carried out on a prototype structure in the form of a low-profile steel arch made from corrugated plates, covered with soil, which was intended as a wildlife overpass. The considered structure 17.7 m in span, 5.5 m high and over 15 m long, was made without any stiffening components. The aim of the tests was to determine the state of strain (stress) and displacement in the steel shell in the course of backfilling and the influence of time on the measured quantities during and after this process. The precision (total station) surveying method was used to measure displacements. Strains were measured by electrical resistance strain gauges stuck directly on the steel structure in the circumferential and longitudinal directions. Stresses and internal forces (bending moments and axial forces) in the particular cross sections of the tested object were calculated on the basis of the experimentally determined strains. The presented test results can constitute an element of boosting the knowledge about deformations and loads of similar large-span structures, without any stiffening components, during or after the backfilling process.
Keywords
References
Janusz L., Madaj A.: Obiekty inżynierskie z blach falistych. Projektowanie i wykonawstwo. Wydawnictwa Komunikacji i Łączności, Warszawa, 2007
Machelski C.: Modelowanie mostowych konstrukcji gruntowo-powłokowych. Dolnośląskie Wydawnictwo Edukacyjne, Wrocław, 2008
Yeau K.Y., Sezen H., Fox P.J.: Load performance of in situ corrugated steel highway culverts. Journal of Performance of Constructed Facilities, 23, 1, 2009, 32-39
NCHRP Report 473: Recommended specifications for large-span culverts. Transportation Research Board, Washington D.C., 2002
Moore R.G., Bedell P.R., Moore I.D.: Investigation and assessment of long-span corrugated steel plate culverts. Journal of Performance of Constructed Facilities, 9, 2, 1995, 85-102
Bednarek B., Czerepak A.: Animal crossing built over A2 motorway in Poland. Archives of Institute of Civil Engineering, 1, 2007, 45-51
Janusz L., Bednarek B., Tomala P.: Doświadczenia w budowie obiektów z blach falistych o bardzo dużej rozpiętości. Nowoczesne Budownictwo Inżynieryjne, 24, 3, 2009, 96-98
Kunecki B., Korusiewicz L.: Field test and three-dimensional analysis of soil-steel arch with ribs, in: Shell Structures. Theory and Applications. CRC Press/Balkema, Leiden, 3, 2014, 535-538
Machelski C.: Deformacja stalowych powłok mostowych obiektów gruntowo-powłokowych podczas zasypki. Geoinżynieria: drogi, mosty, tunele, 29, 6, 2010, 24-30
Korusiewicz L., Kunecki B.: Behaviour of the steel box-type culvert during backfilling. Archives of Civil and Mechanical Engineering, XI, 3, 2011, 637-650
Flener E.B., Karoumi R., Sundquist H.: Field testing of a long-span arch steel culvert during backfilling and in service. Structure and Infrastructure Engineering, 1, 3, 2005, 181-188
Flener E.B., Sundquist H.: Full-scale testing of two corrugated steel box culverts with different crown stiffness. Archives of Institute of Civil Engineering, 1, 2007, 35-44
Kunecki B., Korusiewicz L.: Field tests of large-span metal arch culvert during backfilling. Roads and Bridges - Drogi i Mosty, 12, 3, 2013, 283-295
Czerepak A., Zouhar J.: Deformation control during assembly and backfilling of a corrugated steel structure, Ostrava, Czech Republic. Archives of Institute of Civil Engineering, 12, 2012, 85-93
Machelski C.: Zmiany promienia krzywizny powłoki mostowego obiektu gruntowo-powłokowego podczas budowy. Roads and Bridges - Drogi i Mosty, 9, 4, 2010, 47-67
Machelski C.: Estimation of internal forces in the shell of soil-steel structures on the basis of its displacement during backfilling. Studia Geotechnica et Mechanica, 31, 1, 2009, 19-38
Korusiewicz L., Chruścielski G., Jasiński R.: Practical aspects of strains, stresses and internal forces estimation during field and laboratory tests of corrugated culverts. Archives of Institute of Civil Engineering, 12, 2012, 117-131
Bęben D., Mańko Z.: Behaviour of corrugated plate culvert under backfilling loads. Steel Construction, 2, 3, 2009, 188-202
Bakht B.: Evaluation of the design methods for soil-metal structures in Canada. Archives of Institute of Civil Engineering, 1, 2007, 7-22
Vaslestad J.: Long-term behaviour of flexible large-span culverts. Publication No.74, Norwegian Pub. Roads Administration, Oslo, 1994, 38-56
Vaslestad J., Kunecki B., Johansen T.H.: Twenty one years of earth pressure measurements on buried flexible steel structure. Archives of Institute of Civil Engineering, 1, 2007, 99-108
Janusz L., Madaj A., Sturzbecher K.: Railway grade separation made of corrugated steel plate structure – long term research. Archives of Institute of Civil Engineering, 1, 2007, 233-244
Madaj A., Sturzbecher K.: Changes in stress level in a corrugated steel structure under long-term loads. Archives of Institute of Civil Engineering, 12, 2012, 175-184
Madaj A., Węgrzynowski M., Janusz L.: Long term observations of a 3-span highway corrugated steel box bridge on Gniezno bypass. Archives of Institute of Civil Engineering, 12, 2012, 197-203
Machelski C.: Influence of live loads on the soil-steel bridges. Studia Geotechnica et Mechanica, 26, 3-4, 2004, 91-119
Bęben D.: Evaluation of backfill corrosivity around steel road culverts, Roads and Bridges - Drogi i Mosty, 12, 3, 2013, 255-268
Rowińska W., Wysokowski A., Pryga A.: Zalecenia projektowe i technologiczne dla podatnych konstrukcji inżynierskich z blach falistych. IBDiM, Żmigród, 2004